Blog

Sullivan’s Jewelers Featured Ways to Make Your Diamond Look Bigger

  • upgrade diamond rings at Sullivan’s Jewelers on a budget
  • add a halo around your current diamond to give it a fresh new look
  • illusions style ring makes the diamond look larger and protects it for long term wear
  • three stone ring makes the diameter of your diamond look larger
  • cushion halo can make your round diamond have a fresh new look
  • give your marquise a makeover with a white gold halo head in your existing ring you and your friends will love it

 

 

With the addition of Pinterest, people are becoming more design conscious.  With all of the drool worthy pins out there, it can make a diamond ring you received a decade or so ago look tiny.  Have no fear Sullivan’s Jewelers is here! If you are contemplating the need for an upgrade on your diamond ring we can help offer you some budget friendly solutions.

Not everyone has the budget to replace a diamond with a larger one.  If you do, we usually recommend you go up by at least a full millimeter so you can SEE the difference since you are paying the difference.  A 1/4 carat to a 1/3 carat is hard to tell apart unless you have your calipers on you…  Remember, carat refers to weight, not size, so not all 1 carat diamonds are the same diameter.  Your old diamond (they are all old technically) can be moved over as a side stone or made into a pendant.

It may be that you do not WANT to replace your original diamond at all.  It has been my experience that men are many times more sentimental about keeping the same diamond throughout the marriage.

To preserve the peace without breaking the bank, there are several ways to boost your original diamond’s “presence” with Sullivan’s Jewelers. The on-site jewelers will give you peace of mind knowing your diamond will be set at the family owned & operated location in Melbourne, FL.

  1. Add a halo.  It adds approximately 2-2.5mm of sparkly to the center of your ring.   The final look will depend on your original diamond size.  The diamond in the center can be situated above or level with the other stones.  For those of you in the healthcare industry, a low bezel set center can reduce the normal snagging on latex gloves.  Lifestyle matters too!  There are halo versions with varying stone sizes (usually .01-.03ct each). This new setting can usually be added to your original engagement ring with some slight modifications.  By adding the halo in white, you can update the look of a yellow gold ring and help your jewelry “blend” in more with your other sterling and white gold/platinum pieces.   Also check into different prong styles.   Also there are faux channels with mini milgrain that can lend a vintage look to your ring.  Some halos have stones on the sides of the halo as well.  These add cost, but can be super pretty as well.  Have a fancy shape diamond?  Don’t worry, they make halo heads for them as well!   Estimated cost $850 depending on size of your stone.
  2. New head.  Usually a thicker one, perhaps with double prongs or tulip prongs.  Some people don’t like the look of halos, so they opt to boost their center diamond by thickening up their prongs.  8 prong heads (octet heads) give a designer finish to the ring that isn’t available “off the rack” at most stores.  Tulip heads are named for their obvious resemblance to the flowers.  Another advantage to the thicker prongs is more durability for everyday wear and tear.  By the way, if you have had your ring for a decade and never had your prongs retipped or at least checked, you may want to consider a replacement head or service work (retipping) anyway.  It’s like getting your oil changed–not glamorous, but necessary for the longevity of your ring. Wide and narrow bezel settings also boost the “spread” of your ring, but I find they tend to make an engagement ring look more casual that its prongy cousins;) Estimated cost $150
  3. Have an old set of diamond earrings?  Add them as side stones.  Different shapes?  Doesn’t matter!  This one is a little trickier as there are three options.  Option one: reset original diamond and two earrings into a new setting.  There are a lot of combinations to three stone rings (some of which have way more than three stones lol).  If your original stone and earrings fit into a standard configuration, an off the rack mounting will do the trick.  Estimated cost $750.  Option 2: Add a wrap to your original ring.  This usually only works with solitaires (no side stones).  The wrap extends over the solitaire shank making it look (kinda) like one ring.  It may need to be soldered together to prevent slippage.  Estimated cost $700.  Option 3: Add smaller earring diamonds in a custom bridge.  This one is trickier to estimate a price on since every ring is different.  Adding them in a bypass style can also affect how your wedding band (if you have one) will fit next to your new altered ring.  Estimated cost less than $1000 definitely, but come into Sullivan’s Jewelers on 192 and we can confirm what would work best with what you have.  Fun alternative to this is adding a pair of gemstones instead.  Sapphires, blue topaz, etc. all look gorgeous next to diamonds!  Same price for labor.
  4. Illusion head/plate.  This used to mean white gold diamond cut plate that was used to accent a teeny diamond in a pretty noticeable setting.  There are more modern options to this!  One option is to recreate the vintage box setting.  This illusion setting makes a round stone look bigger, squarer, and more vintage.  Estimated cost: Starts at $250.  A free form ring doesn’t make your diamonds look bigger necessarily but by combining it with other medium sized diamonds, it can make the impact of the ring look bigger.  The estimated cost depends on the finished weight of the free form ring (there are stock options and custom options) and how many heads/stones need to be set.
  5. Narrow or pinch the shank.  There is always more than one way to skin a cat, so now we will take our focus off the diamond and put it on the ring it sits in.  A good rule of thumb is this: the wider the band, the small your diamond will look.  Think about a shift dress.  It looks like a straight column.  If you were to add a belt, it would make your waist look much smaller.  The same thing holds true for rings.  If you use a razor (tiny narrow band) shank, your stone will look bigger no matter its size.  Your jeweler will be able to tell you if your original engagement ring shank can be slimmed down (without causing stability issues) or if you can simply transfer your center head and stone to a narrower base.  Another fun alternative if you don’t want to give up a wider ring is to get a pinched shank that narrows near the stone.  Use caution because narrow rings fit differently than wider ones so make sure you are fitted for the new ring style and width (there are different sets of sizers for this reason).  Also, a narrow shank ring is more likely to rotate on the hand if you have big knuckles.  Most people do…A flared or European shank may help counterbalance to solve this issue.